nitrous wont engage using msd window switch help
Thread Starter
On The Tree
Joined: Feb 2010
Posts: 147
Likes: 0
From: tucson, Az
nitrous wont engage using msd window switch help Well like the title says my buddies nitrous wont engage now that he is using a digital msd window switch P/N 8969 he has it set to cyl #4 mode but no matter what he sets the on and off to it does nothing any help would be appreciated this is the wiring diagram he used
TECH Fanatic
Joined: Sep 2003
Posts: 1,058
Likes: 1
Well like the title says my buddies nitrous wont engage now that he is using a digital msd window switch P/N 8969 he has it set to cyl #4 mode but no matter what he sets the on and off to it does nothing any help would be appreciated this is the wiring diagram he used
Ls1tech & Truck Sponsor
iTrader: (4)
Joined: Jun 2010
Posts: 2,267
Likes: 1
From: Wichita falls Texas
We always pull the signal from an individual coil. Just make sure it matches what your tach is reading.
-Garrett
-Garrett
Last edited by NitrousExpress; Aug 5, 2014 at 04:09 PM.
