LS1TECH - Camaro and Firebird Forum Discussion
LS1-LS2-LS3-LS6-LS7 PERFORMANCE
Nitrous Oxide
Nitrous Outlets 92MM Plate Installation Help

Nitrous Oxide Installation | Tuning | Products

Sponsored by:

Nitrous Outlets 92MM Plate Installation Help

Reply Subscribe

Search this Thread

Old

Dec 19, 2014 | 08:17 PM

#1

Thread Starter

Staging Lane

iTrader: (6)

Joined: Sep 2009

Posts: 65

Likes: 0

From: NC

Default

Nitrous Outlets 92MM Plate Installation Help

Hello all,

I recently bought a 92mm Plate kit (http://www.nitrousoutlet.com/efi-wet...te-system.html) I was curious as to if i needed anything else to install the kit or if there was anything else i needed to buy. The only experience i have is with a Zex kit i had on my old car that was only good for a 125 shot and had a WOT switch that was connected to the TPS sensor. Any help would be great. Its a 1999 Trans am A4.

Old

Dec 19, 2014 | 10:31 PM

#2

Teching In

Joined: Jun 2010

Posts: 49

Likes: 0

From: odessa,Texas

Default

Bottle heater, window switch and purge. Would be good.

Old

Dec 22, 2014 | 08:59 AM

#3

brandon@nitrousoutlet

FormerVendor

iTrader: (2)

Joined: Feb 2013

Posts: 1,479

Likes: 21

From: Waco, TX

Default

Quote:

Originally Posted by pstexas2

Bottle heater, window switch and purge. Would be good.

Every nitrous system should have these accessories. Feel free to shoot me a PM or give me a call and I can get you set up with that stuff.

Reply Subscribe

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 04:58 PM.