Help Identifying NX stuff

Reply Subscribe

Thread Tools

Search this Thread

Nov 18, 2016 | 01:57 PM

MaroonMonsterLS1

Thread Starter

TECH Junkie

Joined: Dec 2012

Posts: 3,614

Likes: 1,326

From: Iowa

Help Identifying NX stuff

I recently purchased a nitrous setup from a buddy. He didn't know too much about it, and I can't find many identifying marks to help me sort things out.

I have a fuel solenoid (large solenoid), nitrous solenoid (small solenoid), purge solenoid (bare black body), and a "vortech" nozzle

I am wondering if anybody can just tell from looking what these solenoids are. Also, wondering if there is a way to measure the orifice size as I believe that is what will be the limiting factor in how much the solenoids can flow.

Also, I can't find jetting charts for the vortech nozzle. I can find them for the newer piranha nozzle but not mine?
Any help is appreciated!

Attached Thumbnails

Help Identifying NX stuff-20161106_203056.jpg

Help Identifying NX stuff-20161106_203115.jpg

Help Identifying NX stuff-20161106_203422.jpg

Nov 20, 2016 | 03:41 AM

MaroonMonsterLS1

Thread Starter

TECH Junkie

Joined: Dec 2012

Posts: 3,614

Likes: 1,326

From: Iowa

Bump!

Maybe someone from nx with a jet chart or link?

Nov 20, 2016 | 07:21 PM

tug686spd

TECH Resident

iTrader: (11)

Joined: Mar 2008

Posts: 800

Likes: 16

These are most likely Stage 6 soleniods. Nitrous noid will be .093 and fuel will be .187. If there is a "P" on the botton of the nitrous noid that means its a larger noid around .120.

Nov 21, 2016 | 01:45 PM

NitrousExpress

Ls1tech & Truck Sponsor

iTrader: (4)

Joined: Jun 2010

Posts: 2,267

Likes: 1

From: Wichita falls Texas

It looks like you have two .063 Nitrous noids and a .187 Fuel noid paired with an older aluminum vortech nozzle.

You'd be good to around 175hp but I'd probably stick around 150hp.

Single Nozzle jetting @ 55psi