Standalone and racefuel
02-14-2018, 05:01 PM
#1
Teching In
Thread Starter
Join Date: Nov 2016
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Standalone and racefuel I知 currently tuned on 93 regular pump gas. On a 75 shot. I知 redoimg my setup. Running a plate instead of a fogger. So my question is, I want to run a standalone system to mix with 110/93. But since I will be running a standalone and not on the fuel rail anymore will I need completly different fuel jets? Since it痴 running at a lower psi as if I was to run right off the fuel rail?
02-14-2018, 05:56 PM
#2
9 Second Club
iTrader: (9)
Join Date: Apr 2011
Location: Indian Rocks Beach Fl
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
If your running lower psi in your standalone then you def will need to have different jetting. I just used the same psi as my motor 58ps. In my st andalone
02-14-2018, 06:14 PM
#4
9 Second Club
iTrader: (9)
Join Date: Apr 2011
Location: Indian Rocks Beach Fl
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
I use 2 internal efi pumps , and a aeromotive regulator with a 8an return to keep pressure steady on a carb setup or can be used for FI with changing the regulator
02-15-2018, 05:30 PM
#6
http://www.nitrousoutlet.com/dedicat...ystems/gm.html
You can run our stand alone fuel systems at high pressure or low pressure. As stated above, you will need to get the corresponding fuel jets to match the fuel pressure you are running. Let us know if you have any other questions!
You can run our stand alone fuel systems at high pressure or low pressure. As stated above, you will need to get the corresponding fuel jets to match the fuel pressure you are running. Let us know if you have any other questions!