NX MAF kit results, with traction this time :)
Thread Starter
8 Second Club
iTrader: (34)
Joined: Nov 2001
Posts: 10,852
Likes: 1
From: Knoxville, TN
NX MAF kit results, with traction this time :) Put the ET drags back on the car and tried again this week. No nitrous, 7.43 @ 94mph with a 1.670 60' (tight converter), NX MAF kit 100 shot (52/31 jetting) 11.3:1 a/f in high gear - 6.76 @ 101.9 with a 1.491 60 foot. Bottle pressure was around 900psi. I would say this thing works pretty well 
sure did look like it was haulin *** down the track kevin, nice job, stick the 125 N20 jet in there and see what she does, shoulda seen the look on peoples faces 
when you pulled that little dragster lookin Rod or whatever the hell it was 
Thread Starter
8 Second Club
iTrader: (34)
Joined: Nov 2001
Posts: 10,852
Likes: 1
From: Knoxville, TN
My TP4200 only stalls like 3500 on the motor, its tight. When I floor it the nitrous is on, converter flashes to 4400 spraying. I am running a 9x28x15 ET drag. Have no idea what the rpm going through the 1/8 is, was watching the wideband and the clocks to see what I ran
Here is a 4.5 mb video of the 6.76..
http://169.254.194.104/676.WMV
Here is a 4.5 mb video of the 6.76..
http://169.254.194.104/676.WMV
9 Second Club
Joined: Jul 2003
Posts: 1,195
Likes: 0
We had a cutomer do the same thing. We installed a MAF kit and he took it to the track.
Stock 4L60E
Stock 10bolt (3.73)
Stock bottom end
Heads and cam with a 125 shot.
6.48 with a 1.41 60ft. LOL I couldn't believe my own eyes. He about **** himself on the launch. LOL
Stock 4L60E
Stock 10bolt (3.73)
Stock bottom end
Heads and cam with a 125 shot.
6.48 with a 1.41 60ft. LOL I couldn't believe my own eyes. He about **** himself on the launch. LOL
