NEED Help!!
Thread Starter
TECH Resident
Joined: Dec 2003
Posts: 797
Likes: 0
From: Long Island, NY
NEED Help!! Hey,
I had a accident today. Dont want to get into it..
But on my TNT kit, one of the lines that go into the nozzles, the fitting broke inside the nozzle. I have pictures... I guess I need that fitting that connects into the nozzle and a new nozzle since the fitting broke inside of it..
I circled what broke.
Here is WHERE it broke inside one of the nozzles. Its the n2o one if that makes the difference....
I am guessing I will need one new nozzle and 1 new fitting right?
How much do you think these parts are? I tried to call TNT but it was too late they were closed.
Thanks guys
-Zee
I had a accident today. Dont want to get into it..
But on my TNT kit, one of the lines that go into the nozzles, the fitting broke inside the nozzle. I have pictures... I guess I need that fitting that connects into the nozzle and a new nozzle since the fitting broke inside of it..
I circled what broke.
Here is WHERE it broke inside one of the nozzles. Its the n2o one if that makes the difference....
I am guessing I will need one new nozzle and 1 new fitting right?
How much do you think these parts are? I tried to call TNT but it was too late they were closed.
Thanks guys
-Zee
I've done the same thing. You don't have to buy a new Nozzle. Here's what I did. Took a small flat head screw driver, filed it down to just over the size of the opening, taped it into the nozzle so I could unscrew the broken part. Now give David a call at TNT and he'll sell you the new fittings for like $4 a peice. Better buy a couple, I've broken two in the past year. 
BTW: Where you using a 3/8" wrench to hold the fitting while tightening the line?
BTW: Where you using a 3/8" wrench to hold the fitting while tightening the line?
