Today i started withe installation of my NX MAF kit.I just start from the inside of the car with the electric stuff.
Now my quetion is to wish of the 3 wire on the TPS i going to hook of my TPactivation switch? Please i need help.

Thanks

 

Come on guys point me in the rigth direction!!!

 

cant help u there i am not useing a tps switch just a wot switch

 

Most of us use a lever style wot switch. Your TPS sensor uses a constantly changing voltage, unless you have a converter for that it wont work.

 

Ok sorry I didnt get to this earler.
Use a voltage meter set on DC volts.
The wire that reads 0 to 5 volts at full throttle is the one you splice into.
Hope this helps.
Dave

 

Thanks Dave.


Dave in your opinion a WOT switch more safer the TPAS?

I both the kit from Dave about 2 weeks ago and their service rock.I'm pleased with them.For me is one of the best sponsors here!!!

 

It really depends on what you are looking for.The TPS makes for a nice clean hidden install.But you cant beet the price for our Billit brackets and micro switches.
Both will get the job done.
And Thank You very much for your support.
Dave