Gear ?
Thread Starter
12 Second Club
iTrader: (7)
Joined: Nov 2003
Posts: 523
Likes: 0
From: Naperville, IL
Originally Posted by SS Mark
2.73 gear, oh and your car is slow you stupid frenchie, why dont you go break another axle
-Mark
-Mark
SOME ONE HELP ME
Scott
Originally Posted by Silver 00 SS
Im going to whip out the 3 man water balloon lancher and pelt ur house from here if ur not careful
SOME ONE HELP ME
Scott
SOME ONE HELP ME
Scott
Second of all, where was this water balloon launcher when we needed to nail innocent bystanders over the summer?
I swear you are worthless
-Mark
Thread Starter
12 Second Club
iTrader: (7)
Joined: Nov 2003
Posts: 523
Likes: 0
From: Naperville, IL
Originally Posted by SS Mark
First of all, i dont think you will be able to hit my house from a mile away.
Second of all, where was this water balloon launcher when we needed to nail innocent bystanders over the summer?
I swear you are worthless
-Mark
Second of all, where was this water balloon launcher when we needed to nail innocent bystanders over the summer?
I swear you are worthless
-Mark
Scott
Trending Topics
Originally Posted by mdblackz28
if it is an m6 car, go with a 4.10 gear...it will be good for on and off the spray
Originally Posted by jamnut
With a 150 shot and a 4.10 gear, he will be really close to running out of gear in 4th at the top of the track with the stock rev limiter. Also 4.10's are weak enough in a NA application on a 7.5" 10 bolt. With the added stress from the Torque that the nitrous puts out those 4.10's aren't gonna make it long. If he has 4.10's & ever goes to a H/C setup with a 150 shot he will run out of gear by the top of the track. I would recommend 3.73's or maybe 3.90's. He's gonna make enough torque outta the hole with the 3.73's & spray to make some pretty good short times.


