hey guys, stupid question but I was just wondering....

I bought a ZEX wrap style heater and was wondering on a 15 lb. bottle if there is a better place than others to mount the heater, i.e. top 1/3, middle, bottom etc.. Also, is there a way to get the heater to go past it's limit? It heats to about 900 or 950 psi, is there a way to get to 1050 or 1100 psi ?

thanks for the help guys!

 

anybody???

 

Probably need 2 heaters on a 15# bottle, or maybe get a bottle blanket......I have a NX heater & i get 1050 out of it on my 10# bottle pretty quickly.

 

I would second the dual bottle heater post.You have 50% more bottle that your trying to heat.I would either do a nx heater or a Dyno Tune.

 

From what I can tell, the dynotune is the same as the NX heater, just about 70 bucks cheaper.

 

Big Diffrence between DynoTune's heater Kit and NX is the DynoTune heater kit is pressure adjustable.
Dan