Things to think about.
Thread Starter
Closed ex-Sponsor Account
iTrader: (1)
Joined: Jul 2004
Posts: 2,797
Likes: 0
From: Wichita Falls, TX
Things to think about. I have been looking back at posts were people have stated that others companies solenoids are the same as NX. Ok just because companies buy solenoids from the same place does not mean they are the same solenoids. Same goes for all other parts in the nitrous kits.
I can buy a 05 Corvette from the same dealership that just sold a 80's chevette that does not make them the same car.
Plus each kit does things differently as far as looks, installation time, etc. Please make any selection on the following bases.
quality of product, customer service, warranty, company that can supply you with all the pieces needed, the look you are going for, cost of product. Customer service, I can not say enough about that one. Cost should always be the last thing looked at.
Serveral companies could go to a dyno with there products, the same day, same car, and come up with there posted results. That really does not show or prove anything. You would have to evaluate the data, who made the power at what jetting, or whos number where closes to posted advertised hp numbers, or how much work when into the install, or even which one looked better.
Just my 2 cents
Ricky
I can buy a 05 Corvette from the same dealership that just sold a 80's chevette that does not make them the same car.
Plus each kit does things differently as far as looks, installation time, etc. Please make any selection on the following bases.
quality of product, customer service, warranty, company that can supply you with all the pieces needed, the look you are going for, cost of product. Customer service, I can not say enough about that one. Cost should always be the last thing looked at.
Serveral companies could go to a dyno with there products, the same day, same car, and come up with there posted results. That really does not show or prove anything. You would have to evaluate the data, who made the power at what jetting, or whos number where closes to posted advertised hp numbers, or how much work when into the install, or even which one looked better.
Just my 2 cents
Ricky
TECH Junkie
Joined: Dec 2001
Posts: 3,242
Likes: 0
From: Lakeland, FL
I agree with the above and with that being said aren't the NX Solenoids lifetime garaunteed? If so does this mean that they have to fail before we can send them in or does it mean we can send them in yearly for a checkup?
Also what address/number do we call to do this?
BTW I am currently running an NX direct port/progressive controller setup and have man nx noids which is why I am wondering.
Also what address/number do we call to do this?
BTW I am currently running an NX direct port/progressive controller setup and have man nx noids which is why I am wondering.
The one thing I'd like to mention is the fact that there is only two companies that i have ever seen post on these forums about their product and to me that says alot about a company and their concern for what we want and what they can do better to help us out! when's the last time a NOS rep posted up or helped you when your noid stuck open. (that almost sounds dirty) lol.
thanks Ricky for all the help and great product.
thanks Ricky for all the help and great product.
Thread Starter
Closed ex-Sponsor Account
iTrader: (1)
Joined: Jul 2004
Posts: 2,797
Likes: 0
From: Wichita Falls, TX
Mike any customer can send in their NX solenoids whenever they want them check out. The charge would be for freight inbound and outbound. Turn around time is 1-3 days. If a part needs to be replace at that time it will be at a no charge.
The lifetime garaunteed solenoid is you wear it out using a progressive controller, I will replace what broke and or just give a new noid out. (warranty does not cover coil burn out)
The address is
Nitrous Express
5411 Seymour Hwy
Wichita Falls TX 76310
888-463-2781
Ricky
The lifetime garaunteed solenoid is you wear it out using a progressive controller, I will replace what broke and or just give a new noid out. (warranty does not cover coil burn out)
The address is
Nitrous Express
5411 Seymour Hwy
Wichita Falls TX 76310
888-463-2781
Ricky
Originally Posted by Mike K.
I agree with the above and with that being said aren't the NX Solenoids lifetime garaunteed? If so does this mean that they have to fail before we can send them in or does it mean we can send them in yearly for a checkup?
Also what address/number do we call to do this?
BTW I am currently running an NX direct port/progressive controller setup and have man nx noids which is why I am wondering.
Also what address/number do we call to do this?
BTW I am currently running an NX direct port/progressive controller setup and have man nx noids which is why I am wondering.
Thread Starter
Closed ex-Sponsor Account
iTrader: (1)
Joined: Jul 2004
Posts: 2,797
Likes: 0
From: Wichita Falls, TX
Your Welcome!
Ricky
Ricky
Originally Posted by 30thz
The one thing I'd like to mention is the fact that there is only two companies that i have ever seen post on these forums about their product and to me that says alot about a company and their concern for what we want and what they can do better to help us out! when's the last time a NOS rep posted up or helped you when your noid stuck open. (that almost sounds dirty) lol.
thanks Ricky for all the help and great product.
thanks Ricky for all the help and great product.
Last edited by NXRICKY; Jan 19, 2005 at 02:13 PM.
Originally Posted by 30thz
The one thing I'd like to mention is the fact that there is only two companies that i have ever seen post on these forums about their product and to me that says alot about a company and their concern for what we want and what they can do better to help us out! when's the last time a NOS rep posted up or helped you when your noid stuck open. (that almost sounds dirty) lol.
thanks Ricky for all the help and great product.
thanks Ricky for all the help and great product.
i agree with barny
