Mounting the Shark Nozzle
Thread Starter
TECH Regular
Joined: Feb 2003
Posts: 498
Likes: 0
From: Miami ,Fl
Mounting the Shark Nozzle Does it matter which side of the bellows I mount the shark nozzle? I've already mounted the solenoids by the fuse boxes on the drivers side and mounted the shark nozzle in the bellows on the driver's side as well.
Does mounting it on the passenger's help to get more fuel to the #8 cylinder since it's the furthest and commonly runs leaner than the other cylinders or does it not really matter because of the velocity it's being sucked into the motor?
Does mounting it on the passenger's help to get more fuel to the #8 cylinder since it's the furthest and commonly runs leaner than the other cylinders or does it not really matter because of the velocity it's being sucked into the motor?
Thread Starter
TECH Regular
Joined: Feb 2003
Posts: 498
Likes: 0
From: Miami ,Fl
Originally Posted by juiSSed1172
Doesn't matter.. just make sure the orifice is facing into the motor.
I may not be the sharpest tool in the shed but I can still cut through wet cardboard. 
Last edited by Wile_E; Jan 27, 2005 at 07:48 PM.
