bottle fitment
Originally Posted by Hennytime
you have a pic of it? hard to imagine
**EDIT: Also, how does this kit seem, a guy sent me the link from another forum http://cgi.ebay.com/ws/eBayISAPI.dll...950306106&rd=1 the basic feeling i'm getting from zex is its for ricers and is a waste of time
**EDIT: Also, how does this kit seem, a guy sent me the link from another forum http://cgi.ebay.com/ws/eBayISAPI.dll...950306106&rd=1 the basic feeling i'm getting from zex is its for ricers and is a waste of time
I would go with NX or NOS.
Some guys like TNT as well.
Originally Posted by K9Kev
1- Go to Home Depot; Buy a 4 foot by 2 inch x 1/8 inch piece of flat metal ($4.00)
2- Bend it in the bench vice with room where the holes are under your rear seats on either side. Bend flat for the base, then up along the driveshaft tunnel, then accross the tunnel (approx 6 inches) then repaet back down the other side.
3- Use one of your stock bottle brackets and bolt this to the top of your home mount.
4- Say it w/ Kryon...drill mounting holes.
5- Mount your bottle between seats and put your stock cushions back in.
6- Pat yourself on the back and sit back and drink beer.
= $ 5.00 and fifteen minutes time.
Have fun,
Kev
2- Bend it in the bench vice with room where the holes are under your rear seats on either side. Bend flat for the base, then up along the driveshaft tunnel, then accross the tunnel (approx 6 inches) then repaet back down the other side.
3- Use one of your stock bottle brackets and bolt this to the top of your home mount.
4- Say it w/ Kryon...drill mounting holes.
5- Mount your bottle between seats and put your stock cushions back in.
6- Pat yourself on the back and sit back and drink beer.
= $ 5.00 and fifteen minutes time.
Have fun,
Kev
Thread Starter
12 Second Club
iTrader: (33)
Joined: Jan 2005
Posts: 2,584
Likes: 0
From: winter springs, fl
Originally Posted by 97LT1
Yo about the kit, i think that is way overpriced. + why would you buy from an international sale for nitrous. I dont know what they pay overseas but we dont here in TX at least. You can find brand new from one of the sponsers cheaper im sure.
I would go with NX or NOS.
Some guys like TNT as well.
I would go with NX or NOS.
Some guys like TNT as well.
Originally Posted by Hennytime
who are the sponsors and how would i pay? i need some hook ups
-I can get a pic on Thursday but will need some 'puter help on getting it posted.
-Anyone who can advise on OR host the pics, please PM me and we'll get them up ASAP.
-It is such and easy and clean install that it almost looks like OEM
Kev
-Anyone who can advise on OR host the pics, please PM me and we'll get them up ASAP.
-It is such and easy and clean install that it almost looks like OEM
Kev
Originally Posted by K9Kev
-I can get a pic on Thursday but will need some 'puter help on getting it posted.
-Anyone who can advise on OR host the pics, please PM me and we'll get them up ASAP.
-It is such and easy and clean install that it almost looks like OEM
Kev
-Anyone who can advise on OR host the pics, please PM me and we'll get them up ASAP.
-It is such and easy and clean install that it almost looks like OEM
Kev
Thread Starter
12 Second Club
iTrader: (33)
Joined: Jan 2005
Posts: 2,584
Likes: 0
From: winter springs, fl
Originally Posted by 97LT1
Look to the right of the screen and choose the sponsers site you wanna look at. You will pay whatever methods they accept. Usually credit/ debit card is good.
I dont know it sounds like you need a used kit if you ask me.
https://ls1tech.com/forums/nitrous-oxide/270466-sale-nos-125-dry-shot-complete-system.html look at this guys.
https://ls1tech.com/forums/nitrous-oxide/270466-sale-nos-125-dry-shot-complete-system.html look at this guys.
Last edited by 97LT1; Feb 3, 2005 at 09:29 PM.
Launching!
Joined: Jun 2003
Posts: 241
Likes: 0
From: Kansas City
Just use the NOS 5177 bottle brackets. Mount the lower bracket to the floor between the rear seats. Cut the LOWER portion (between the mounting holes) of the upper bracket in half and bend vertical with a slight bend at the mounting holes and mount to the floor. With a 10lb., or 12.5lb. carbon fibre bottle, you can keep the rear seats. With the 15lb. bottle, the rear seat must be removed. PM if you want pics.
Ok heres more pics courtesy of K-9 kev.
This is what he was talking about as far as making and mounting the bracket to the seat bolts. K-9 thats a 10lb bottle right?
This is what he was talking about as far as making and mounting the bracket to the seat bolts. K-9 thats a 10lb bottle right?
Yes, I'm using a 10 lb. bottle. There is enough room there for your elbows, heck...you can even still use the cup holders. You could likely move it back even further if you changed up the angles.
