i'm thinking of going with the gemini quad dominator dual stage pp/pp that's rated to 1,000hp 500 per stage. dave i'll pm you about pricing. but can you all tell me how it supports 500hp per stage with those little pre bent aluminum lines. would it be more effecient to replace them with braided line and a NX Y block and then continue with braided line down to both fittings on the plate and do that for both stages?
it's part #66570

 

More effecient probably, but not need. Those little lines have plenty of ID to get 500 hp out of them. Now if you wanted any more lets say 600+ then we need to go to a large ID line. The Y fitting idea we just never have flowed the systems that way and are not sure what the amount of increase might be.

Ricky

 

so with the larger solenoids and the braided lines do you think the plate has the capabilities to support more hp.

 

Possible not sure, only a flow bench test could confirm.
Ricky

 

well thank you very much for the information. i appreciate you putting up with me LOL. probably will be ordering within the next week or so. any possibility of you putting together the kit with the need braided lines and y blocks at an extra price or just ordering them seperately.

 

We can build to order but remember I will have no way of knowing what it might do to the tune up. Hope we can help.
Ricky

 

well it will be tuned on the chassis dyno with egt's anyway. especially before the big pills hit it.