Spraying thru a powershift?

Reply Subscribe

Thread Tools

Search this Thread

Feb 16, 2005 | 03:35 AM

jmac_98ls1

Thread Starter

Staging Lane

iTrader: (1)

Joined: Jun 2004

Posts: 72

Likes: 0

From: Pevely, MO

Spraying thru a powershift?

is anyone doing this i was thinking about in but not sure yet. i just read about the new accel nitrous programer that will shut the spray off 50 rpm before the rev limiter but will this system work with my car, to my understanding (which i am probably wrong) there is no simple ignition box, or is there?

thanks

jmac

Feb 18, 2005 | 09:22 AM

Camaroholic

TECH Senior Member

iTrader: (1)

Joined: Nov 2001

Posts: 6,449

Likes: 1

From: Waco, TX

I do it. A standard window switch works fine for me. I have an older Mallory window switch. I set my PCMs rev limiter high (like 7500 or so), shift light at 6900, and window switch to 7000 or so. Leaves me plenty of room. I'd MUCH rather have more room up top (500 RPMs) so that I don't hit the stock rev limiter (which cuts fuel). 50 RPM to me would be too close. More like 200-300 minimum.