N20 install help!!!!!!
Thread Starter
Teching In
Joined: Feb 2005
Posts: 20
Likes: 0
N20 install help!!!!!! Ok I have a used TNT F1 set up. So I have the Ring, lines, dyno tune purge, bottle heater, NOS brand 15# bottle, & MSD Digital window switch.
What am I missing to get this combo going all together? I think I need a WOT switch but I looked at dyno tunes web site and seen a device that might work instead of the WOT switch. http://www.speedshop.org/store/Scrip...?idproduct=105
Will this product work instead of the regular style WOT switch I think this would look a lot cleaner. Thanks
What am I missing to get this combo going all together? I think I need a WOT switch but I looked at dyno tunes web site and seen a device that might work instead of the WOT switch. http://www.speedshop.org/store/Scrip...?idproduct=105
Will this product work instead of the regular style WOT switch I think this would look a lot cleaner. Thanks
Yep, that TPS switch will work. For your install just make sure that you have some teflon paste, and plenty of wire and connectors. You'll also probrably need to trim your lid so a you'll need a hack saw or a dremel handy too. Did you get the directions and everything with your kit? I have the TNT diagrams uploaded to my website if you need them. 
