I know this is a primarily V8 forum...but I just gotta ask cause I trust you guys...what is the best product, size, etc. for putting a nitrous system on a V6? How big a shot, etc...I don't anything about it so...also, what alterations would have to be made to the engine so as to withstand nitrous? thanks!

 

Seems like most guys run a 75 shot or so...I'd go wet for the extra torque but dry is alot more simple. For someone who's new to the game and want's to play it safe go with the HALO system from Nitrous Outlet...it's an 80hp shot really simple install

 

what has to be done to the engine to best prepare it for nitrous...as far as daage goes, etc.?

 

please help...

 

What is daage?

You can spray 100hp on a completely stock engine, no problem as long as your tune is right.
You never said what vehicle or what V6 you have.

I spray 100+ into my 4.3 V6 dry in front of a descreened MAF. It adjusts for fuel automatically.

 

it is a 2.5L V6..."daage" was supposed to be "damage" sorry!

 

HAVE YOU HAD ANY PROBLEMS AFTER DESCREENING YOU MAF? JUST CURIOUS.

 

No none. You have to descreen if you're going to spray through the MAF.

 

THANKS!

 

i sprayed 150 wet through a 4.3 no problems yet, cylinders still looked good before the hi po rebuild

 

so you guys are saying get a new fuel pump and mass air flow sensor and I should be good??