got an idea
Thread Starter
11 Second Club
iTrader: (1)
Joined: Apr 2004
Posts: 590
Likes: 1
From: F' Reno I live in Sparks
got an idea I got an idea if i can find the parts, Basicly wiring a pressure transducer for N.O and set the swich to turn on a 1200 psi to a purge noid to vent mininal amonts of nitrous rather that having the burst disk blow and losing all your nitrous. what do you guys think??
Thread Starter
11 Second Club
iTrader: (1)
Joined: Apr 2004
Posts: 590
Likes: 1
From: F' Reno I live in Sparks
Im just saying its an idea. I persionally run a nitrogen push system so im really not affected that much by not havig a bottle heater, But for the people who live in Hot climates or Geneticly dumb and wire the heater for constant power versus keyed power its an idea. Also im not talking aBout replacing the burst disk im talking about away to vent a little nitrous vs a whole 15 lb bottle, which costs about 90 dollars to refill up here.
12 Second Truck Club
iTrader: (1)
Joined: Jun 2004
Posts: 1,395
Likes: 0
From: The Chicken Ranch, California
Originally Posted by 860 Performance
Not a bad idea, except that the bottle would have to be open all the time for it to work.
Thats true, and you could wire the purge into 12V batt( not ign) so the car dosent even have to be on for it to work.
Originally Posted by Magic Chicken
Unless you upgrade your bottle valve to the NX Pure-Flo 45 or NOS Super-Hi Flow. They both have push ports and gauge ports built in. Both of these valves kick ***.
