nitrous gurus please shine in ?????
Thread Starter
Launching!
Joined: Dec 2003
Posts: 208
Likes: 0
From: claymont delaware
nitrous gurus please shine in ????? yesterday i went to the dyno and put down 510hp and 639tq at the wheels and my a/f was all over the place......at 4100rpm i dynoed 510hp with a a/f of 14.2 at 4300rpm hp was 501 with a 13.9 a/f reading then at 5400rpm hp was 460 and a/f was 12.4 to 1 a loss of 50hp as the rpm increases the hp drops also as a/f gets better the hp drops bigtime......this was with a full bottle and bottle pressure was 1050 after a purge.....i will try to post a dyno slip ....what i'm getting to is do you guys think the wideband could of been wrong???? because of how the power realy dropped off....... this was on a stock truck motor with stock muffler no cat
what is your opinion on this dyno run i will try to post it soon.....thanks for any help
what is your opinion on this dyno run i will try to post it soon.....thanks for any help
Last edited by h777; Mar 27, 2005 at 11:30 AM.
Thread Starter
Launching!
Joined: Dec 2003
Posts: 208
Likes: 0
From: claymont delaware
Originally Posted by h777
Holding the gas pedal down all the way?
What does the car do on motor? Is this just a N2O problem?Sean
Thread Starter
Launching!
Joined: Dec 2003
Posts: 208
Likes: 0
From: claymont delaware
Originally Posted by Gustin
Holding the gas pedal down all the way? What does the car do on motor? Is this just a N2O problem?
Sean
What does the car do on motor? Is this just a N2O problem?Sean
on just motor it made 311hp uncorrected.... 303hp corrected and 338tq at the wheels motor is bone stock only bolt on mod is a homemade intake open exhaust no programmer
i'm not sure why power dropped in the higher rpm the a/f was getting better at 5300rpm a/f was 12.4 to 1
this is a truck not a car........5000 pounds
