Wiring help
#1
Launching!
Thread Starter
Join Date: Mar 2005
Location: Las Vegas
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Wiring help
I got all the wiring for my nitrous kit and my harlen window switch ( thanks shai ) and I was wondering how to wire everything up I have all the directions but I'd like some response from someone who has done it befor. Wiring is my weak point. It would be a great help if I could get a full diagram on how to wire everything up the harlen window switch into the dynotune nitrous kit. Thanks guys in advance, also anything i'm gonna need to wire the switch. I'll be using a jimmy jams bracket to hook the wot switch up and his ashtray plate. Should I wait to wire up the system for when I get my purge kit?I will also be running a bottle heater if this helps I know its more wiring
Last edited by zrated; 03-28-2005 at 03:13 AM.
#2
You're welcome Chris. Just start running the wires through the firewall to the arming switch, and the purge button.
Mount your relay, window switch, etc. and run the wires.
Mount your relay, window switch, etc. and run the wires.