Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

no jets

Old May 24, 2005 | 01:13 AM
  #1  
TTTA's Avatar
Thread Starter
Staging Lane
 
Joined: Jul 2003
Posts: 86
Likes: 0
Default no jets

Search feature wasnt working when I tried to search for this.

I have a bottle in a bag kit, on a stock 2000 TA, I have heard of other people running no jets. Anyone else have luck with this?

My friend ran his 2001 TA for 2 years like this (different kit) saying the soleniod was only good for 175, so thats all he would make reguardless of the jet....

Thoughts?
Reply
Old May 24, 2005 | 05:24 AM
  #2  
DopeFedZ's Avatar
TECH Senior Member
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (34)
 
Joined: Apr 2002
Posts: 5,231
Likes: 20
From: Houston TX
Default

Not sure exactly what hp you get from no jets but my friend did the same thing in his TA for a few years.
Reply
Old May 24, 2005 | 11:18 AM
  #3  
DynotuneN2O's Avatar
LS1TECH Sponsor
iTrader: (13)
 
Joined: Jul 2004
Posts: 1,766
Likes: 0
From: Massachusetts
Default

Yes, im sure the solenoid flow is limited to 175hp max by the internal orifice size.

Cheers

Dan
Reply
Old May 24, 2005 | 06:43 PM
  #4  
TTTA's Avatar
Thread Starter
Staging Lane
 
Joined: Jul 2003
Posts: 86
Likes: 0
Default

Originally Posted by DynotuneN2O
Yes, im sure the solenoid flow is limited to 175hp max by the internal orifice size.

Cheers

Dan

Thanks! Anyone reccomend a boost a pump?
Reply
Old May 24, 2005 | 10:30 PM
  #5  
MakoLS1's Avatar
TECH Apprentice
 
Joined: Jul 2004
Posts: 375
Likes: 0
From: Carolina
Default

i did that with an nos 5177 kit for a long time, lol. Never had any problems and it ran like a top.
Reply
Old May 24, 2005 | 11:23 PM
  #6  
TTTA's Avatar
Thread Starter
Staging Lane
 
Joined: Jul 2003
Posts: 86
Likes: 0
Default

Thanks guys, I really DID need this just to make me feel better about going without jets.

I just had my MAF crap on me, I think its because (from reading on the board) I had the line pointed into the duct where the MAF is. Where should I place the line in the air box(its all still stock)?

I have the line zip tied to the middle of the box, pointed towards the driver side of the car, so its not pointing straight at the MAF

Or should I just put it in the corner like other have done?
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:54 AM.