I went to put my TNT F1 kit on this last weekend and was getting done when we went to check for leaks we found a couple coming from the fitting from the nitrous seloniod and the purge seloniod. My first mistake was to let my one of my (not know how to use the right tool for the job) friend tighten up the fittings so we didnt have a leak. Well to get to the point he used channle locks to tighten up the fittings and rounded off everything, so to tighten them up i was in a hurry like a idiot the only way to do it was to just turn the hole purge seloniod to even move it so thats what i did and snaped the bottom bolt that screws into the bottom of the nitrous seloniod clean in half and need one of those and a fitting for the purge, that has 3 holes, one on both sides and one in the middle that you screw something into. I know this sounds stupid but its coming from a 19 year old who knows very little about nitrous and will have someone else put it on so i can make sure it works!

thanx for the help and if there is somewere i can buy those i would be very great full.

josh

 

well...this is basic stuff. Your gonna have to disconnect the lines...and remover and replace all rounded fittings. DO NOT try to half *** fuel connections. Replace the damaged fittings. When you go to reinstall them into the noid...be sure to use teflon paste or preferally some liquid type thread sealer.

We have several sponsors on your right----> that carry the fittings you need. Nitro Dave and dynotune both could help you out.

 

We have these parts in stock.Give us a call.1-866-648-7637.

Nitrous is not a install you want to be carteless and in a hurry on...
Dave

 

there is nothing on nitrous outlet that has what im talking about. Is there any other stores on that might have it?

josh

 

i would call tnt directly, they are very helpful and can get you anything you need.

 

Josh,
We carry so many items that alot of them are not on the web site.Its better to just call us.
1-866-648-7637.
Thanks
Dave

 

I just got home for lunch and i dont have time to call so ill call tomarrow and we can get the ball rolling again on the setup.

thanx
josh

 

What dave said. Bad fuel connections equate to a cookout on the roadside with your *** being served well done... Take the time, do it right, use proper tools.