This guy has no clue!!!
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Originally Posted by KECHME
Now thats how you shut me up!!!!!! 2K is on the table, thats all I need to hear, see you boys at MIR.
TECH Apprentice
Joined: Nov 2001
Posts: 434
Likes: 0
From: ROWLETT TX USA
Originally Posted by Noyzee
the beast guy, katch me or what ever it is. i read your post, and for what its worth, i wasnt singling anyone out.
and i never clamed to be the fastest anything.
come on to MIR and win some $$$$ 1/8 mile Boy. LO|L
and i never clamed to be the fastest anything.
come on to MIR and win some $$$$ 1/8 mile Boy. LO|L
signed
1/8th mile boy
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
i read it, come get your money!! lol
i would say if 3 cars go in the 8's first round, the fastest car wins
so dont waist your time, im going to win anyway. hehehe
i would say if 3 cars go in the 8's first round, the fastest car wins
so dont waist your time, im going to win anyway. hehehe
I guess my post opinion had some merit after all....
Joe O. by the way are the heads on your car LT1 or converterd to LT1?I'm converting a LT1 to Edlebrock EFI/Accufab 1300/MSD Dist. (FAST SEQ) and was curious as to which head is on your car....
Joe O. by the way are the heads on your car LT1 or converterd to LT1?I'm converting a LT1 to Edlebrock EFI/Accufab 1300/MSD Dist. (FAST SEQ) and was curious as to which head is on your car....
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Originally Posted by KingCrapBox
This is why you will never be fast.
at 3400 pounds. 
Last edited by Noyzee; Aug 26, 2005 at 09:03 PM.
Yeah a 7.8 isn't impressive for a STOCK 5.4ltr motor, with forged Pistons and Rods. Stock Crank, Heads (NON PORTED), Stock Cams (Navigator (4valve)), with a Sheet metal intake and a 101mm Turbo @ 3300lbs.. Now thats impressive.. You've got along way to come Noyzee.. You could'nt get your turbo setup right.. and your still as slow as our stock bottem end cars in Houston. 
Remember that!
Remember that! 
9 Second Club
Joined: Nov 2002
Posts: 1,295
Likes: 1
From: VA
Originally Posted by JS
I guess my post opinion had some merit after all....
Joe O. by the way are the heads on your car LT1 or converterd to LT1?I'm converting a LT1 to Edlebrock EFI/Accufab 1300/MSD Dist. (FAST SEQ) and was curious as to which head is on your car....
Joe O. by the way are the heads on your car LT1 or converterd to LT1?I'm converting a LT1 to Edlebrock EFI/Accufab 1300/MSD Dist. (FAST SEQ) and was curious as to which head is on your car....
AFR lt1 227's
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by Reckless
"First to go 8's"?
Why not just the fastest ET in X/M trim during the event, but must be inthe 8's. No way to regulate who makes passes in what order. Still waiting on info from Ken.
Why not just the fastest ET in X/M trim during the event, but must be inthe 8's. No way to regulate who makes passes in what order. Still waiting on info from Ken.
Todd I will be at the shop "Sat" Ken or I will post on the issue....
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Originally Posted by Mr Powell
Yeah a 7.8 isn't impressive for a STOCK 5.4ltr motor, with forged Pistons and Rods. Stock Crank, Heads (NON PORTED), Stock Cams (Navigator (4valve)), with a Sheet metal intake and a 101mm Turbo @ 3300lbs.. Now thats impressive.. You've got along way to come Noyzee.. You could'nt get your turbo setup right.. and your still as slow as our stock bottem end cars in Houston. Remember that!
Remember that!
WTF???
I don't know Mark, Your tight *** sure got your car hauled for free with my F350 & 44' Gooseneck to the Thunder event in Baton Rouge last November. What's so Fucked Up is that you not once offered to put fuel in the truck, round trip. Hell you didn't even extend any graditude what so ever!!! As I see it, You are one tight *** M.F.!!! That car will never see the inside of my trailer ever again.
And while I'm venting, You talk more **** on here. You've never laid one wrench on that damn car. C.J. is the one that built the damn thing. ****, you're even too damn scared drive it!!! C.J. has all the bragging rights, not you...
I have no problem with someone expressing pride in a car they put together. But it makes me want to
when I read some of your bullshit!!!
example: You must have one small pecker to be this frickin insecure!!!!
Whew, It was time I got that **** off my chest
-Dave
Originally Posted by Elite_Hot_Rod
Amen brotha, at 9 MPG haulin the car it would cost me damn near $1,150.00 just to get there and back, uh no brainer there.
I don't know Mark, Your tight *** sure got your car hauled for free with my F350 & 44' Gooseneck to the Thunder event in Baton Rouge last November. What's so Fucked Up is that you not once offered to put fuel in the truck, round trip. Hell you didn't even extend any graditude what so ever!!! As I see it, You are one tight *** M.F.!!! That car will never see the inside of my trailer ever again.
And while I'm venting, You talk more **** on here. You've never laid one wrench on that damn car. C.J. is the one that built the damn thing. ****, you're even too damn scared drive it!!! C.J. has all the bragging rights, not you...
I have no problem with someone expressing pride in a car they put together. But it makes me want to
when I read some of your bullshit!!! example:
Originally Posted by Elite_Hot_Rod
And just who the **** are you loud mouth and what the **** have you done lately? Come on down to Texas and we'll show you just how fast we are buckwheat.
Whew, It was time I got that **** off my chest
-Dave
TECH Addict
Joined: Jun 2002
Posts: 2,920
Likes: 57
Originally Posted by SPRSPT
Todd I will be at the shop "Sat" Ken or I will post on the issue....
An official ESP OSR 1 post will be made on the subject....SOON
(Rules/Requirements etc...)
"Everybody keep your panties on." The 2k is on the table....
Originally Posted by Z8'S
Does this 2k deal only apply to N20 cars? or is it for any Extreme Mod legal car? **** my car was running 8's 2 years ago EM LEGAL
**** my car was running 8's 2 years ago EM LEGAL 
Originally Posted by scottywheels
Sean is here we just talked to Ken....
An official ESP OSR 1 post will be made on the subject....SOON
(Rules/Requirements etc...)
"Everybody keep your panties on." The 2k is on the table....
An official ESP OSR 1 post will be made on the subject....SOON
(Rules/Requirements etc...)
"Everybody keep your panties on." The 2k is on the table....
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Originally Posted by JS
Noyz did u ever think u and I could cause so much chest thumpin
U guys got me all crazy in the head to build another car.....
U guys got me all crazy in the head to build another car.....
