I was wondering how everyone is mounting there nozzles for a wet system on the ls1. I have seen the NX setup and the TNT power ring...but is there a cheaper way that works just as well. has anyone tried anything that work well...maybe with some pics??

thanks guys
DUsitn

 

Mount it in the bellows rihgt before your TB and after your MAF. Just buy the locking nuts that screw onto the nozzle and hold the Nozzle in place in your bellows

 

Here's a few picts:

http://www.harrisspeedworks.com/shop...37d89f8267302b

It uses a retaining nut to secure the nozzle in place. Here's a link to the a retaining nut:

http://www.harrisspeedworks.com/shop...cat=265&page=1

Matt

 

Dustin,
Nitrous Expresses two piece locking nut is the best and cheapest way out there.If you wanted to be real cheap you can tap your maf housing for the nozzle.
Dave

 

Thanks guys that look pretty good and definatly cheaper then 300 plus dollar power rings and such

thanks