Was thinking about going with a 2 stage with a dry NOS5177 kit and a tnt kit but was thinking about getting a stand alone set up for the wet kit. Any ideas in what all is neaded. I have an idea but would like a list if possible to make shure im not leaving anything out. Also i know fuel is most important with a set-up like this so is an intank 255, 42# inj. and the stand alone with an aditional 255 sufficiant? Also it will be ran with 110 octane. Anyhelp/pics would be greatly appreciated.
Thanks
-Joe

 

2 255 Pumps are more than enough for most systems out there.. You might check with Nitrous Outlet standalones. I have seen alot of pics and he puts everying in there. I can not post any pics dial up sucks.
www.nitrousoutlet.com
Ricky

 

If you don't buy the stand alone set up Nitro Dave sells you will need a fuel cell, fuel pressure regulator, fuel pump and fuel lines and fittings.

 

Here's what I'll be getting (eventually) https://ls1tech.com/forums/nitrous-oxide/367170-nitro-daves-fuse-box-side-stand-alone-fuel-system-installed-pics.html

-somebody

 

thanks alot guys. You helped alot

 

If I can help you in any way with one of our units please let me know.
Thanks
Dave

 

Get one of Nitro Daves...trust me. It may sound like alot...but in the long run its gonna cost you close to that doing it yourself. I just finihsed about 90% of my stand alone today and I used a Jazz fuel cell and a stand alond pump/regulator combo. Those parts added up to about $350. Then I had to get lines, make lines, get fittings, figure out mounting and routing etc. Its a little more of a PITA than it first appears. Today I spent another $130 in misc. fittings

I have also installed one of Daves sytems.....and it could not have been easier. Highly recomend the prebuilt setup that just bolts in.

 

https://ls1tech.com/forums/nitrous-oxide/384506-look.html

 

nitro dave is the way to go with this.