New noid mount for a WEt kit.
#1
Closed ex-Sponsor Account
Thread Starter
iTrader: (1)
Join Date: Jul 2004
Location: Wichita Falls, TX
Posts: 2,797
Likes: 0
Received 0 Likes
on
0 Posts
New noid mount for a WEt kit.
Had a customer Mr. Macon post up some where about a noid bracket for his car. So I pm him with let me do it.
He wanted a clean setup and gave me what he was looking for..But the old brain started truning begore he even finished the question.. I asked for free rain of this project, and he agreed. A few days later we had 1 done.
The bracket uses the stock MAF bolts and will hold 1 fuel, 1 nitrous, and 1 purge solenoid...
Future models will be lightened up a bit in the middle... And now there is a very clean way to mount your solenoids in a very out of the way kind of place. And in fact on a MAF kit the lines will only be about 5" for hard lines, and if a single nozzle about a foot..
If for a MAF kit you will need a couple of fittings, 1/8npt x -3 90 fitting, and 1/8npt x -4 90 fitting for the fuel noids. This would yeild the shortest lines possible..
So what yall think...
Ricky
He wanted a clean setup and gave me what he was looking for..But the old brain started truning begore he even finished the question.. I asked for free rain of this project, and he agreed. A few days later we had 1 done.
The bracket uses the stock MAF bolts and will hold 1 fuel, 1 nitrous, and 1 purge solenoid...
Future models will be lightened up a bit in the middle... And now there is a very clean way to mount your solenoids in a very out of the way kind of place. And in fact on a MAF kit the lines will only be about 5" for hard lines, and if a single nozzle about a foot..
If for a MAF kit you will need a couple of fittings, 1/8npt x -3 90 fitting, and 1/8npt x -4 90 fitting for the fuel noids. This would yeild the shortest lines possible..
So what yall think...
Ricky
Trending Topics
#9
Closed ex-Sponsor Account
Thread Starter
iTrader: (1)
Join Date: Jul 2004
Location: Wichita Falls, TX
Posts: 2,797
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DSG
Bad ***... How about some in car pics when the install is complete. Also is this going to be marketed?? If so...How much?
And yes going to market. Can not put a price on a public forum that we do not sponsor.
Originally Posted by CAT3
How about some pics with the new Noids! Damn it man, come on!
Originally Posted by silverZ98
how much for it and all fitting you need
Originally Posted by Robert56
Very nice. Quite the craftsman and/or engineer.
Robert
Robert
Thank Trooper I knew you had already seen it, on that other board.
Ricky
#13
Originally Posted by Nitro Dave's Nitrous Outlet
LOL.
Because your paycheck vanishing keeps us from vanishing
Dave
Because your paycheck vanishing keeps us from vanishing
Dave
#14
10 Second Club
iTrader: (2)
Join Date: Dec 2004
Location: Sumter, South Carolina
Posts: 1,386
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by NXRICKY
Had a customer Mr. Macon post up some where about a noid bracket for his car. So I pm him with let me do it.
Ricky
Ricky
Let me say what a pleasure it is to publicly thank Ricky, NX and also Nitro Dave who's combined patience have created a monster of sorts. Not to mention Xtrooper Steve and a few others...enough pseudo award speech crap. This is FUN stuff for me. I like clean installs. I will be posting several pictures in a month or so as my engine is reworked including saying goodbye to my Zex and hello to the NX MAF.