Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Timing and N02

Thread Tools
 
Search this Thread
 
Old Nov 10, 2005 | 01:55 AM
  #1  
ALPINE's Avatar
Thread Starter
TECH Enthusiast
 
Joined: Dec 2002
Posts: 546
Likes: 0
From: College Staion, Texas
Default Timing and N02

Can someone explain to me how I user/install a timing tricker? My Z06 is tuned for the juice, so it runs rich as hell n/a. My buddy told me I could set something up to be able to switch the advance easily between n/a and N02 runs.
-JC
Reply
Old Nov 10, 2005 | 07:23 AM
  #2  
Matt@HSW's Avatar
FormerVendor
iTrader: (14)
 
Joined: Jun 2005
Posts: 2,056
Likes: 0
From: Glenolden, PA
Default

Do you mean the LS1 Timing Tuner? If so, it won't control your A/F, but yes, it will control the amount of timing that you run. Depending on how your N2O kit is installed you might/might not have to do a little re-wiring. The Timing Tuner will then activate your nitrous kit, and when doing so it will pull the amount of timing that you set it to. It also can advance your timing at part throttle and wot and includes a window switch and delay timer. More info:

Link to LS1 Timing Tuner

Matt


Originally Posted by ALPINE
Can someone explain to me how I user/install a timing tricker? My Z06 is tuned for the juice, so it runs rich as hell n/a. My buddy told me I could set something up to be able to switch the advance easily between n/a and N02 runs.
-JC
Reply
Old Nov 10, 2005 | 11:31 PM
  #3  
ALPINE's Avatar
Thread Starter
TECH Enthusiast
 
Joined: Dec 2002
Posts: 546
Likes: 0
From: College Staion, Texas
Default

Thats the money shot, thanks!
-JC
Reply
Old Nov 11, 2005 | 10:07 AM
  #4  
Caribe's Avatar
11 Second Club
20 Year Member
iTrader: (1)
 
Joined: Dec 2003
Posts: 667
Likes: 1
From: League City, TX.
Default

He might also be talking about putting a resistor to make the IAT detect a hotter temp thus pulling timing. Here is the thread and diagram:
https://ls1tech.com/forums/showthrea...&highlight=BMN
Attached Thumbnails Timing and N02-timing-tricker.jpg  
Reply
Old Nov 11, 2005 | 03:58 PM
  #5  
terry s's Avatar
TECH Apprentice
iTrader: (5)
 
Joined: Jun 2005
Posts: 366
Likes: 0
Default

Can anyone tell me where the AIT is located on a 2002 Z06
Thanks
Reply
Old Nov 13, 2005 | 11:43 PM
  #6  
Nitro Dave's Nitrous Outlet's Avatar
FormerVendor
iTrader: (25)
 
Joined: Jun 2002
Posts: 12,283
Likes: 4
From: Waco, TX
Default

Terry,
WE have had real good luck with the timming tuner. We sell alot of them. I have not tried the resistor mod.
Dave
Reply




All times are GMT -5. The time now is 02:49 PM.