06 300C NX project
Thread Starter
Staging Lane
Joined: Sep 2005
Posts: 55
Likes: 0
I wish there was something out, SuperChips says they will release one maybe end of feb/march time frame luckily though the newer trucks are getting the MDS motors as well so now there is a demand for the programmer. As of yet though nothing is out there yet that I can use 
Anyways thanks for the help i'll keep plugging away and get all the kinks worked out.
Anyways thanks for the help i'll keep plugging away and get all the kinks worked out.
Thread Starter
Staging Lane
Joined: Sep 2005
Posts: 55
Likes: 0
well went from a 100 to a 125 shot a few weeks ago and changed the plugs to NGK LZTR5A-13. My base line went up a few horsepower from 246 RWHP to 249 RWHP, on the dyno with N20 I went from 313.7 RWHP at 5000 rpm to 345.4 RWHP at 4500 RPM my torque went from 385.1 at 4200 rpm to 413.2 at 4300 rpm. I am using the NX jets #28 for fuel and #55 for the N20.
I am adding the Kook headers onto the car in a few weeks and someone was telling me that adding headers will make the car run leaner I could not find any info on that any problems adding headers then? I am going to the performance shop at the end of the week to get a 150 shot dyno'ed, and have not talked to the experts yet but just curious why there would be any issues to worry about adding headers? Thanks again all for the help I have gotten here.
NEW DYNO
I am adding the Kook headers onto the car in a few weeks and someone was telling me that adding headers will make the car run leaner I could not find any info on that any problems adding headers then? I am going to the performance shop at the end of the week to get a 150 shot dyno'ed, and have not talked to the experts yet but just curious why there would be any issues to worry about adding headers? Thanks again all for the help I have gotten here.
NEW DYNO
