Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Arming/Activation Question...Help

Thread Tools
 
Search this Thread
 
Old 01-11-2006, 04:36 PM
  #1  
Launching!
Thread Starter
iTrader: (1)
 
BlownChevySS's Avatar
 
Join Date: Jan 2005
Location: SOFLO
Posts: 298
Likes: 0
Received 0 Likes on 0 Posts
Default Arming/Activation Question...Help

I have my system set up with a rocker to activate my system(give power to), a momentary to purge and a WOT switch to engage the fuel and nitrous solenoids. Most people have a window switch or a momentary for this. I was thinking that in the safe rpm range I could just throw the rocker switch up to give power to the sytem and shut it back off since the pedal will be to the floor the whole time. Is that okay to do? Or should I just get a window switch?
Old 01-11-2006, 05:18 PM
  #2  
TECH Senior Member
iTrader: (2)
 
Robert56's Avatar
 
Join Date: Aug 2003
Location: Tacoma, WA
Posts: 9,557
Likes: 0
Received 1 Like on 1 Post

Default

A window sw will allow you to run more consistant, and safer. My buddy does it the way you describe and runs 11.4xs.
Robert
Old 01-11-2006, 05:23 PM
  #3  
Closed ex-Sponsor Account
iTrader: (1)
 
NXRICKY's Avatar
 
Join Date: Jul 2004
Location: Wichita Falls, TX
Posts: 2,797
Likes: 0
Received 0 Likes on 0 Posts
Default

Get a window switch, in a race how has time to look at the tach. And if you are loosing at the start you are more likey to throw the switch on and try to make up time.
Ricky




All times are GMT -5. The time now is 06:32 AM.