Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

My Fjo Ordered! NEED SOME HELP FROM coldfusion -

Old Mar 7, 2006 | 09:43 PM
  #1  
02Vortech's Avatar
Thread Starter
TECH Fanatic
iTrader: (4)
 
Joined: Nov 2005
Posts: 1,078
Likes: 0
Default My Fjo Ordered! NEED SOME HELP FROM coldfusion -

just ordered my FJO controller from DAVE's should be here sometime next week- IM SO EXCITED I will keep yall updated im looking for about 3 or 4 tenths gain in the 1/8th with the better 60' helped bye the progressive window switch -

Question- Im running the smallest cold fusion solenoids and i would like to know what frequency the FJO would work the best with them- THANKS

my best so far on just 75 shot after launching like a puss b/c of no window switch-

1/8th- 9.37 @ 74mph
best 60'
2.007
Reply
Old Mar 7, 2006 | 09:52 PM
  #2  
NXRICKY's Avatar
Closed ex-Sponsor Account
iTrader: (1)
 
Joined: Jul 2004
Posts: 2,797
Likes: 0
From: Wichita Falls, TX
Default

16-18 should be fine. But you might check with cf.
Ricky
Reply
Old Mar 8, 2006 | 07:26 AM
  #3  
ALBERT@COLD FUSION's Avatar
Staging Lane
 
Joined: Dec 2005
Posts: 88
Likes: 0
From: Tomball, Texas
Default

Originally Posted by NXRICKY
16-18 should be fine. But you might check with cf.
Ricky

correct. Most all the small solenoids work well at about the same frequency.
Reply
Old Mar 8, 2006 | 11:47 PM
  #4  
red90cobra's Avatar
TECH Addict
iTrader: (36)
 
Joined: Apr 2002
Posts: 2,526
Likes: 0
From: Murphy, Tx
Default

what bout the bigger one that comes with the direct port kits?
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:23 PM.