First time with nitrous... check my tenative setup...

Reply Subscribe

Thread Tools

Search this Thread

Mar 14, 2006 | 05:40 PM

RideZX-6R

Thread Starter

Launching!

iTrader: (8)

Joined: Dec 2005

Posts: 240

Likes: 0

From: Seattle-ish, WA

First time with nitrous... check my tenative setup...

Ok, So I plan on purchasing Nitrous in the next few months. I have a mild bolt-on setup and was wondering what I'd need besides the stuff I have picked out...

Here are my current mods...
Mac Mid-lengths
Drilled TB butterfly
ORY
SLP exhuast
SLP lid
Gutted MAF
160 tstat (doubt that matters)
will be buying 4.10s... but that doesnt matter either I'd assume.

I plan on getting from DynoTuneNitrous...
LS1 75-150 shot wet kit (using 150)
Remote opener
Bottle Heater
Two Stage RPM/TPS switch

What else do I need, if anything?
Also when I get a cam (which I plan on doing as well) would I need anything for the nitrous kit to cope with that? I plan on getting TSP's Magic Stick Cam.

Thanks In Advance!!!

Mar 14, 2006 | 06:02 PM

Matt@HSW

FormerVendor

iTrader: (14)

Joined: Jun 2005

Posts: 2,056

Likes: 0

From: Glenolden, PA

You should be okay, you'll want to do a colder set of spark plugs when you spray (TR6s). When you do the cam you might want to look into upgrading your fuel system, like to a Racetronix kit.

Thanks,
Matt

Mar 14, 2006 | 10:39 PM

AdReNoLiNjUnKiE

Teching In

Joined: Mar 2006

Posts: 28

Likes: 0

When you do the CAM of course change the SPRINGS!! TUNE!! 150 shot FUEL PUMP!! Tr6 plugs!! Maybe purge!!

Mar 14, 2006 | 10:52 PM

227Hawk

TECH Fanatic

iTrader: (1)

Joined: Nov 2001

Posts: 1,735

Likes: 0

From: Turlock, Ca

Seeing as how it's a 98 and probably got some miles to it i would turn an eye to the fuel pump for upgrading. And a 150 shot is going to be looking for fuel
Hawk