When installing the bottle, how do you get the feed line to the front of the car and keep it hidden?? Do you drill a hole so the ffed line can go under car??? Anyone who has nitrous please tell me how they routed their feed line to the noids

 

I routed mine through the car under the carpet, under the passanger side trim, and out the hole behind the PCM. If you go this route, put some wire loom around the braided line once you get close to the fire wall, wouldn't want your feedline rubbing holes in any wires.

 

I just drilled a whole and ran it under the car. I don't think you can use too many tie wraps to keep it away from the ground and hot things..

 

I ran mine as well under all the interior panels and carpet along the passenger side just like GM MUSCLE... Saves a lot of money on braided line as well.

 

Did Mine Under Car Line Than Came With Kit Reached Fine And Havent Had Any Issues

 

There is a grummet in the bottom under the spare tire. Just cut a small hole grummet and stick the line through from the bottom of the car. put a little silicone around the grummet.