update pics! getting close!
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
update pics! getting close! https://ls1tech.com/forums/eastern-members/506751-new-motor-pics-not-resized-yet.html
sorry for the ink, im just lazy. lol
sorry for the ink, im just lazy. lol
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
thanks guys, im doing what i can,
slow, your ike the 5th person to say that. lol
i have no more mirriod stainless, just brushed. the mirriod stuff is to much money for us to keep instock, and it scratches soooo easy. i can do them brushed stainless, or alum.
let me know.
slow, your ike the 5th person to say that. lol
i have no more mirriod stainless, just brushed. the mirriod stuff is to much money for us to keep instock, and it scratches soooo easy. i can do them brushed stainless, or alum.
let me know.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Originally Posted by SSilverSSurfer
put me in line for those super sweet valvecovers....i love the set up...intake looks good too..is that automotive paint or sumthin else?
as for the paint, its a single stage acrilic auto paint, same stuff i used on my engine bay.
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Originally Posted by NitrousDirect
Looks simply amazing but I know she's going to run even better than she looks! 
Congrats and we look forward to working with you throughout the season
Congrats and we look forward to working with you throughout the season I know, i saw all the other posts, hahaha. but seriously, with what i'm planning on doing(running pipe down through that hole to the holes in the camaro bumper, it works perfectly. and honestly, I don't care what it is. whatever is the cheapest since i was looking at just painting it black to go with the car. Just looks too cool
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Originally Posted by Slow Z28
I know, i saw all the other posts, hahaha. but seriously, with what i'm planning on doing(running pipe down through that hole to the holes in the camaro bumper, it works perfectly. and honestly, I don't care what it is. whatever is the cheapest since i was looking at just painting it black to go with the car. Just looks too cool
let me know.
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Originally Posted by Nitro Dave's Nitrous Outlet
Brad,
Car looks great.. I was wondering if that directport was going to fit in there.lol I see it was close. You are going to have fun changing jets on that bad boy.
Dave
Car looks great.. I was wondering if that directport was going to fit in there.lol I see it was close. You are going to have fun changing jets on that bad boy.
Dave
either way, jet changes wont be easy on the frst stage, but i jetted it so i shouldnt have to touch it, the outside 2nd stage is tit to get to.
we'll see
Originally Posted by Noyzee
its tight, but it does fit. i cut out under the cowl, so i can get to everything farly easy. plus the motor is tipped way back because the tranny isnot in, so when you push it down it fits much better.
either way, jet changes wont be easy on the frst stage, but i jetted it so i shouldnt have to touch it, the outside 2nd stage is tit to get to.
we'll see
either way, jet changes wont be easy on the frst stage, but i jetted it so i shouldnt have to touch it, the outside 2nd stage is tit to get to.
we'll see
I figured you had to trim the cowl. I noticed that one solenoid was sitting up above the cowl. The motor being tilted back will explain that.
The car looks really good. You have done a great job. It looks like you are getting real close. The car is going to look good and should move down the track pretty well also.
Dave
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Originally Posted by Nitro Dave's Nitrous Outlet
Cool,
I figured you had to trim the cowl. I noticed that one solenoid was sitting up above the cowl. The motor being tilted back will explain that.
The car looks really good. You have done a great job. It looks like you are getting real close. The car is going to look good and should move down the track pretty well also.
Dave
I figured you had to trim the cowl. I noticed that one solenoid was sitting up above the cowl. The motor being tilted back will explain that.
The car looks really good. You have done a great job. It looks like you are getting real close. The car is going to look good and should move down the track pretty well also.
Dave
im close, im hoping to be done, tuned and racing in 2-4 weeks
if everything goes right
You're not the only one hoping that bad boys gets on the track soon! Glad you are supportive too Dave.. It's exciting, can't wait for that first time slip... Stop looking at her Brad and get to work hahah
Glad you are supportive too Dave.. It's exciting, can't wait for that first time slip... Stop looking at her Brad and get to work hahah