Got me a new best today!!!!!!!!!!
Originally Posted by Loudmouth LS1
Thanks guys, after finally gettin to watch the vid today, the only thing I think I need to change is stiffen up the front shocks a little so it doesn't bounce as bad when it comes down! She definately carried them out past the 60' mark and tripped the beams with the rears, and it just looked perfect, not too high, not too low! Can't wait to get the vid up for you guys too see, probably tomorrow night!
Thread Starter
TECH Junkie
iTrader: (10)
Joined: Nov 2002
Posts: 3,672
Likes: 0
From: Deerfield Beach, FL
Thanks guys, and 99Formula, yes, if the wheels would've stayed down to trip the beams, the 60' would've been faster, not sure how much, but i'm assuming it would be somewhere in the 1.2x range, especially considering the first run was a 1.31 and wasn't as good of a hook!
Congrats on the new best! Maybe you should look into filling your own bottles from now on though. It's cheaper and you don't have to worry about those bad fills we all hate!
Jeffrey
Jeffrey
Thread Starter
TECH Junkie
iTrader: (10)
Joined: Nov 2002
Posts: 3,672
Likes: 0
From: Deerfield Beach, FL
Originally Posted by B18B1LS1
Congrats on the new best! Maybe you should look into filling your own bottles from now on though. It's cheaper and you don't have to worry about those bad fills we all hate!
Jeffrey
Jeffrey
http://www.holley.com/14251NOS.asp
You need one of those. It will cost a little up front but should pay for itself over time unless you already have a good hook-up. And most welding supply places can get the mother bottles filled for you if you can't get it directly shipped. You could also sell fills on the side to make some extra money too if ya want! Just a thought!
You need one of those. It will cost a little up front but should pay for itself over time unless you already have a good hook-up. And most welding supply places can get the mother bottles filled for you if you can't get it directly shipped. You could also sell fills on the side to make some extra money too if ya want! Just a thought!
Thread Starter
TECH Junkie
iTrader: (10)
Joined: Nov 2002
Posts: 3,672
Likes: 0
From: Deerfield Beach, FL
Originally Posted by B18B1LS1
http://www.holley.com/14251NOS.asp
You need one of those. It will cost a little up front but should pay for itself over time unless you already have a good hook-up. And most welding supply places can get the mother bottles filled for you if you can't get it directly shipped. You could also sell fills on the side to make some extra money too if ya want! Just a thought!
You need one of those. It will cost a little up front but should pay for itself over time unless you already have a good hook-up. And most welding supply places can get the mother bottles filled for you if you can't get it directly shipped. You could also sell fills on the side to make some extra money too if ya want! Just a thought!
Thread Starter
TECH Junkie
iTrader: (10)
Joined: Nov 2002
Posts: 3,672
Likes: 0
From: Deerfield Beach, FL
Originally Posted by Nautilus
Congrats on the new best... car looks great leaving the line!
Originally Posted by Loudmouth LS1
Thanks dude, I saw in the 06 list you broke 9's the other day urself dude, congrats, and from what it says on there, you did it on about half the spray, that **** is awesome!!!!! Got any vids of the runs, would like to check out the car!
Thread Starter
TECH Junkie
iTrader: (10)
Joined: Nov 2002
Posts: 3,672
Likes: 0
From: Deerfield Beach, FL
Originally Posted by Nautilus
No video... I only had a cheap camera with me and the batteries were dead... But I just bought a new digital camcorder... so next time out I'll have video's to post.
Here's a couple refill stations we offer. That's our new sight, and don't forget to check out the bad azz ride on the home page.
http://www.nitrousdirect.com/nitrous/index.php?target=categories&category_id=179
Robert
http://www.nitrousdirect.com/nitrous/index.php?target=categories&category_id=179
Robert
Thread Starter
TECH Junkie
iTrader: (10)
Joined: Nov 2002
Posts: 3,672
Likes: 0
From: Deerfield Beach, FL
Originally Posted by Robert56
Here's a couple refill stations we offer. That's our new sight, and don't forget to check out the bad azz ride on the home page.
http://www.nitrousdirect.com/nitrous/index.php?target=categories&category_id=179
Robert
http://www.nitrousdirect.com/nitrous/index.php?target=categories&category_id=179
Robert
Originally Posted by Loudmouth LS1
Cool man, you gonna hit it bigger next time? What's the setup consist of?
Btw: Congrats on the right up in FSC magazine, you can read more about my car in the same article.... I'm 2 pages before you.
