Can I use low fuel pressure on the NX shark nozzle's?
#1
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Sep 2002
Posts: 1,684
Likes: 0
Received 0 Likes
on
0 Posts
Can I use low fuel pressure on the NX shark nozzle's?
I did a search but got conflicting answers. I know people with DP setup's typicaly use low pressure setups but was not sure about lower pressures with nozzle setup's. I was thinking of useing lower fuel pressure setting with my stand alone, I was thinking of jetting the nirous for a 150 shot but using a 200HP fuel jet, I then wanted to reduce the fuel pressure untill my A/F ratio was good. Is there anything wrong with using this methode with my dual NX shark nozzle setup? Your opinions are much appreciated. Thanks.
Last edited by Oatmeal; 07-02-2006 at 12:47 PM.
#2
TECH Apprentice
iTrader: (2)
Join Date: Jun 2005
Location: Florida's East Coast
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
I can't see why this would be a problem. You will just need to have the correct jetting.
Going with a dual nozzle, it looks like a .045 jet for the nitrous in each nozzle and a .037 fuel (at 10PSI) in each nozzle. This should be right at 150rwhp shot (based on nitrous pressure of 1000PSI) and a good starting point for your A/F ratio.
Going with a dual nozzle, it looks like a .045 jet for the nitrous in each nozzle and a .037 fuel (at 10PSI) in each nozzle. This should be right at 150rwhp shot (based on nitrous pressure of 1000PSI) and a good starting point for your A/F ratio.
#3
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Sep 2002
Posts: 1,684
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Airwolf
I can't see why this would be a problem. You will just need to have the correct jetting.
Going with a dual nozzle, it looks like a .045 jet for the nitrous in each nozzle and a .037 fuel (at 10PSI) in each nozzle. This should be right at 150rwhp shot (based on nitrous pressure of 1000PSI) and a good starting point for your A/F ratio.
Going with a dual nozzle, it looks like a .045 jet for the nitrous in each nozzle and a .037 fuel (at 10PSI) in each nozzle. This should be right at 150rwhp shot (based on nitrous pressure of 1000PSI) and a good starting point for your A/F ratio.
Trending Topics
#9
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Sep 2002
Posts: 1,684
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Nitro Dave's Nitrous Outlet
Yes. Running the NX system at 10psi is no problem. You will just nee dthe correct jetting.
Dave
Dave
Originally Posted by Chris@NitroDaves
Here you go.
HP N20 Fuel@10PSI
35 - 31 24
50 - 35 26
75 - 41 28
100 - 52 38
125 - 57 44 Possibly 41 if 44 is to rich
150 - 62 46
200 - 78 57
225 - 82 57
250 - 88 62
-Chris
HP N20 Fuel@10PSI
35 - 31 24
50 - 35 26
75 - 41 28
100 - 52 38
125 - 57 44 Possibly 41 if 44 is to rich
150 - 62 46
200 - 78 57
225 - 82 57
250 - 88 62
-Chris