Big Power On The Way Just ordered a 2 stage Nitro Dave plate kit. As soon as I get my 4L80E installed I plan on spraying 250 - 300. This should be fun!!! Thanks to Dave for the time on the phone getting this system mapped out. |
Jason, Thank you for your support. You are going to have one sweet setup. Let me know how you like the system. If you need any tech help we are here to help. Ohh and it has already shiped so you should see it real soon. Dave |
Originally Posted by jason99frc Just ordered a 2 stage Nitro Dave plate kit. As soon as I get my 4L80E installed I plan on spraying 250 - 300. This should be fun!!! Thanks to Dave for the time on the phone getting this system mapped out. |
Greg, YES SIR I AM. MY NEW MOTTO "SPRAY IT UNTIL I RUN OVER THE CRANK" I want to build an aluminum 402 or warhawk block 450ish engine anyway and these old 6.0L Iron ARE setups are almost worthless from a resale point, so why not see what it will take. In all seriousness, the new plate system from from Nitro Dave has 5 spray points inside the TB plate, so the distribution/ atomization mixture is great and should flow no problem. I did the dual stage so I can just hit a 100-150 out of the hole and hit another 100 - 150 in second gear so the additional airflow into the engine @ 50+ mph when the 2nd stage hits should help the mixture even more. Im going to start off easy and only run 1 kit @ 100 - 150 to get a feel for how the cylinders like the juice. Ill read some plugs for a while and go from there. Not that it matters for the question you asked but I also ordered a stand alone pressure regulated fuel system like we talked about the other day @ my house. If I cant get the airflow / mixture correct for each cylinder like this then I will sipmly add some parts and convert what I have into a 2 stage direct port. |
I like the way you think! You will be real happy with that plate, I have had nothing but good luck with them. Vinny |
O I'm sure your motor will take it with out a problem I was just concerned about fuel pudling in the intake, let me know how it works for you i might be interested in the plate to replace my two foggers on my first stage |
Greg It will be about 4 weeks before I get the trans and kits installed but I will call you when both kits are armed. |
All times are GMT -5. The time now is 09:45 AM. |
© 2024 MH Sub I, LLC dba Internet Brands