Found my n2o malfunc issue
Found my n2o malfunc issue Have been having trouble geting my system to fire, Had checked all the wiring and bought a new window switch thinking it was the issue. Still no luck so I went with the TPS insteand of the WOT switch thinking that was the issue. Spent hours checking all the wiring and double checking. Finally checked the noids individualy and the gas noid was clicking when I applied power and grounded it and the n2o one doesnt click at all just lies there dead.
Now I have an event on Saturday with a bunch of hairdryers some of them actually will be really fast. I'm without juice......
Left a message for Dave, I'm sure he'll do all he can to help me out. I'm just hoping the "iceman" is covered by warranty?
Now I have an event on Saturday with a bunch of hairdryers some of them actually will be really fast. I'm without juice......
Left a message for Dave, I'm sure he'll do all he can to help me out. I'm just hoping the "iceman" is covered by warranty?
Just a note on the Nitrous Noids, your not supposed to test them for a long period of time (more than 5 seconds) without having Nitrous flowing through them for cooling. Could it be that maybe the coils are bad on the nitrous line from testing a bunch with no nitrous flowing through them for cooling? Just a thought.
Another issue that pops up with the nitrous noids is if you have the bottle pressure too high (say 1200+), the noid may have difficulty opening (try a lower bottle pressure).
Beer
Another issue that pops up with the nitrous noids is if you have the bottle pressure too high (say 1200+), the noid may have difficulty opening (try a lower bottle pressure).
Beer
