Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Knock?

Thread Tools
 
Search this Thread
 
Old Aug 31, 2006 | 12:47 PM
  #1  
boostedrs's Avatar
Thread Starter
On The Tree
iTrader: (2)
 
Joined: Jul 2005
Posts: 152
Likes: 0
From: Etown, KY
Default Knock?

Well yesterday I went to take my buddy for a ride and was wanting him to watch the knock and to log it because I made a nitrous run the day before and it didn't feel like it did previously. So I take him for a ride and go from a 45 jump and spray it. He watches teh knock and he said it hit 1.49 degrees and then started slowly going down. I'm on a 200 shot and this was on PUMP gas. So I'm thinkin it's either time to lower the jets a little or only spray on ras gas? What can I do? Or is this not enough knock to worry about?
Reply
Old Aug 31, 2006 | 05:05 PM
  #2  
FinalTA's Avatar
Launching!
iTrader: (1)
 
Joined: Jul 2002
Posts: 291
Likes: 0
From: Lexington, KY, USA
Default

Are you pulling any timing on that 200 shot? What plugs are you running and at what gap?

Put it on a dyno with a wideband if you haven't already....
Reply
Old Aug 31, 2006 | 09:24 PM
  #3  
n2ocamaro's Avatar
10 Second Club
 
Joined: Apr 2005
Posts: 685
Likes: 0
From: Clarksville, IN
Default

Have you logged any runs off the bottle? It could be false knock. 1.49 is pretty low. A wideband log would tell you for sure.
Reply
Old Aug 31, 2006 | 11:32 PM
  #4  
=ZoomZ='s Avatar
10 Second Club
iTrader: (1)
 
Joined: Oct 2005
Posts: 354
Likes: 0
From: Winter Springs
Default

100 octain would do the trick for ya .

My car was pulling almost 3 degrees on the spray untill i used the 100 and the knock went away .
Reply




All times are GMT -5. The time now is 02:30 AM.