scared to Run NITROUS
scared to Run NITROUS hey guys im not realy familar with nitrous but i would like to run it my mods are in my sig what would i need for a 150 shot and would it hurt my engine i have gm ls1 Hotcam with manely 7.40 pushrods and ls6 valve springs with a fuddle 3500 stall the motor has just been rebuilt it may have 5,000 miles on it so tell me guys what do you think
You should be fine even with the most simple kit (single nozzle). I would suggest going wet over dry but that's just personal preferrence. Nothing wrong with dry. I would also get all the safety stuff i.e. window switch, fuel pressure safety switch, Wide open throttle switch, and bottle heater. There is more you can get to make it safer but that is a pretty basic and safe setup. I'm sure others will get more into it than I did but you get the idea.
P.S. you may want to search for some more info than you'll get out of this thread
P.S. you may want to search for some more info than you'll get out of this thread
You might want to see what you think about the info. in this thread. 
https://ls1tech.com/forums/nitrous-oxide/580592-nitrous-tune-wideband.html
https://ls1tech.com/forums/nitrous-oxide/580592-nitrous-tune-wideband.html
i agree with everyone else just spray it i run the harris speed works brute force kit on their progressive controller to ease in the 250 shot give matt or nick from harris a call they will guide you in the right direction
Trending Topics
12 Second Club
Joined: Apr 2003
Posts: 394
Likes: 0
From: Pa
You will be fine with 150 shot. If you wanted to do a simple setup and safe i would recommend a Nice Dry set-up with no jets, will be about a 125 shot. Get a FPSS and a MSD Window switch. I have a Harris Dry setup and works great. Good Luck
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
thanks for the advice guys i have not ran the car yet since i have had it back i need some slicks and a tune i am hoping i will run mid 12s or better everybody thinks that i can run better will see
Originally Posted by ruck98
hey guys im not realy familar with nitrous but i would like to run it my mods are in my sig what would i need for a 150 shot and would it hurt my engine i have gm ls1 Hotcam with manely 7.40 pushrods and ls6 valve springs with a fuddle 3500 stall the motor has just been rebuilt it may have 5,000 miles on it so tell me guys what do you think
Originally Posted by The Black Beast
You have my permission. What the hell are you waiting for? Just in case, how many miles on the bottom end and that's stock right?
