Nitrous activation light

Reply Subscribe

Thread Tools

Search this Thread

Oct 10, 2006 | 12:35 AM

ls1bud

Thread Starter

Teching In

iTrader: (11)

Joined: Mar 2005

Posts: 25

Likes: 0

From: Monrovia CA 91016

Nitrous activation light

I want to put an activation light on the dash. I want the light to only come on when the nitrous is spraying. Should I just wire in a light coming off the solenoid?

I am using this MSD window switch.

Last edited by ls1bud; Oct 11, 2006 at 05:15 PM.

Oct 10, 2006 | 01:41 PM

04Mark

Teching In

Joined: Sep 2006

Posts: 14

Likes: 0

You could run it off your 'noid or off of you WOT switch. I've got mine hooked to my hobbs switch.
~Mark

Oct 10, 2006 | 02:59 PM

The Sad

12 Second Club

iTrader: (8)

Joined: Feb 2004

Posts: 580

Likes: 0

Quote:

Originally Posted by 04Mark

You could run it off your 'noid or off of you WOT switch. I've got mine hooked to my hobbs switch.
~Mark

That is how I have my light too, off the FPSS. But I put my FPSS after the Fuel noid, so I know if I spray and the light doesn't come on, my Fuel noid did not open (for whatever reason).

Oct 10, 2006 | 04:38 PM

WS6HUMMER

10 Second Club

iTrader: (19)

Joined: Feb 2004

Posts: 2,542

Likes: 2

From: Alexandria La.

Quote:

Originally Posted by ls1bud

I want to put an activation light on the dash. I want the light to only come on when the nitrous is spraying. Should I just wire in a light coming off the solenoid?

That's how I have mine, I wanted to know exactly when the solenoids were getting power not just when my WOT switch is tripped. Got a blue activation light strapped directly on the side of the Harlan light in the vent.

Attached Thumbnails