FJO help. Whats wrong??
11-03-2006, 01:33 AM
#1
TECH Regular
Thread Starter
iTrader: (4)
Join Date: Jan 2004
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
FJO help. Whats wrong?? Ok i have a 150wet kit NX. 99SS. I also have a FJO mini controller. I am running one stage. Well here is my problem. When i set the FJO to come in at 3600 rpm and cut at 6600. Well it does not a problem the NOS sprays just fine, except there is no fuel. Now if i switch the FJO to read TPS as decreasing then it will spray fuel as long as i am in that RPM band and not WOT. At Wot it does nothing. I have played around with a few differant thing and same resultes. The NOS and Fuel Sol are wired together for power and wired together for ground. This there something simple that i am missing?? or did i do this wrong?? I have it wired to my tps signal with from the ECU.
11-03-2006, 09:19 AM
#2
Closed ex-Sponsor Account
iTrader: (1)
Join Date: Jul 2004
Location: Wichita Falls, TX
Posts: 2,797
Likes: 0
Received 0 Likes
on
0 Posts
The mini controlls the grounds to the noids. Do you have a pic of the wiring layout. I am interested in how your noids are connected to each other and to the proper locations.
I need to know what the car is, and the colors on which you are tapping into. Most problems are really simple oop's type stuff.
Ricky
I need to know what the car is, and the colors on which you are tapping into. Most problems are really simple oop's type stuff.
Ricky