I'm closing in on finishing my install, all thats left is the FPSS. Whats the best way to install it? Unscrew the shrader and put the fitting on really fast before a lot of gas comes out of the fuel rail? Not sure what to expect.

 

Put a paper towel under it, bleed the pressure off (if any is on it) like you would a tire, remove the valve. If little or no pressure is on it, not that much gas will come out. ENSURE YOU DO NOT TURN THE KEY ON with the that end of the fuel rail open. Ensure you look for leaks before you start the car when your done (turn the key on).


If the car has been sitting a while, the fuel pressure bleds off, so its not as bad as one would think.

 

thanks