Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Buying a used NX n20 kit questions?

Thread Tools
 
Search this Thread
 
Old Jan 2, 2007 | 11:39 PM
  #1  
ls1amit's Avatar
Thread Starter
TECH Apprentice
 
Joined: Jul 2006
Posts: 398
Likes: 0
From: Jacksonville, Florida
Default Buying a used NX n20 kit questions?

My friend is trying to get me to buy his wet Nitrous Express kit it has been used on a nissan maxima and bmw z3 about a 2 years old plus. It probly has had about 6 bottles through it. The most it has had ran through it was a 100 shot. My questions are what should i look for and do you recomend using this kit? Any opinions and feed back would be great. I would be getting a good deal for it about 250 with kit and new full throttle plate, original 10lb bottle. thanks I will try to get pics up tomarro to show you what ime working with. I think it might come with a bottle heater too im not sure. Also can i run my stock 01 hydrolics do any of you do?
Reply
Old Jan 3, 2007 | 06:43 AM
  #2  
860 Performance's Avatar
TECH Fanatic
iTrader: (1)
 
Joined: Mar 2004
Posts: 1,644
Likes: 0
From: Southern NH
Default

Buying a used NX kit is fine. Just be sure to get all the little fittings /jets / and small parts. If any are missing, the cost can add up quickly to make it complete again. Also check the mfg date on the bottle. It is stamped near the top with all the other stamped info. it has month @ year. Remember bottles need recertification every 5 years, so if the bottle is close to 5 years old you will need to pay for a recertification too.

No idea about what your talking about with the hydraulics?? Are you refering to lifters???
Vinny
Reply
Old Jan 3, 2007 | 10:10 AM
  #3  
ls1amit's Avatar
Thread Starter
TECH Apprentice
 
Joined: Jul 2006
Posts: 398
Likes: 0
From: Jacksonville, Florida
Default

hydrolics i am refering to the clutch system. Thanks for replying i will have to look at the date it was manufactured.
Reply
Old Jan 3, 2007 | 12:38 PM
  #4  
Robert56's Avatar
TECH Senior Member
iTrader: (2)
 
Joined: Aug 2003
Posts: 9,557
Likes: 1
From: Tacoma, WA
Default

It wouldn't be a bad idea to have the noids serviced while kit is apart.
Robert
Reply




All times are GMT -5. The time now is 02:13 AM.