Compression and Spray

Reply Subscribe

Thread Tools

Search this Thread

Jan 8, 2007 | 01:59 PM

Flow Wizard

Thread Starter

Banned

Joined: Jan 2007

Posts: 56

Likes: 0

Compression and Spray

How much Compression are the fast nitrous Iorn Block ls1's running....

My motor is currently being machined and pistons are a 13cc dome and 65cc head. I was planning to do a dual stage nitrous setup for a total of 300-400hp

anyone running 15:1 compression or more on that much nitrous?

Jan 8, 2007 | 05:31 PM

brad8266

TECH Senior Member

iTrader: (23)

Joined: Aug 2005

Posts: 8,797

Likes: 0

From: Watertown, NY

What cam are you running? Piston to valve may be an issue for you with a 13cc dome.

Jan 8, 2007 | 09:03 PM

Flow Wizard

Thread Starter

Banned

Joined: Jan 2007

Posts: 56

Likes: 0

Currently the cam is on the big side 26X/26X .660+/640+ but the pistons have been made to accomodate 800 lift and 310 duration....

My question comes directly about the compression with a 300 shot.

Jan 9, 2007 | 03:36 PM

Juiced

TECH Fanatic

iTrader: (2)

Joined: Sep 2004

Posts: 1,138

Likes: 0

From: Kalifornia

Bump for curiosity....

Jan 9, 2007 | 03:38 PM

brad8266

TECH Senior Member

iTrader: (23)

Joined: Aug 2005

Posts: 8,797

Likes: 0

From: Watertown, NY

Quote:

Originally Posted by Flow Wizard

Currently the cam is on the big side 26X/26X .660+/640+ but the pistons have been made to accomodate 800 lift and 310 duration....

My question comes directly about the compression with a 300 shot.

Whatever compression you want provided you can keep knock in check. That much dome with that huge cam, with the huge shot is gonna be a huge challenge. And 15:1 SCR doest mean **** because I think your DCR will be killed with that huge cam anyway. Good luck keeping it in one piece.