Nitrous Gauge/Switch panel Question
Thread Starter
8 Second Club
iTrader: (9)
Joined: Oct 2005
Posts: 1,085
Likes: 0
From: Ellicott City,MD
Nitrous Gauge/Switch panel Question Has anyone tried mounting a dynotune mini nitrous gauge in a switch panel? I wanted to do something like this http://www.dynotunenitrous.com/store...?idproduct=222
But I have no idea how to mount/secure the gauge.
But I have no idea how to mount/secure the gauge.
First off, that's a vette plate. They have them for Camaros/Birds too. Secondly, they have double face tape on the back however I just installed mine this weekend and drilled two small holes in it and screwed it into the ash tray.
sorry, didn't mean to sound insulting, just thought it got by you. Anyway, the double face tape they put on these panels isn't very strong. Especially with big wires behind it not wanting to lay nice/neat.
The guage needs a simple square hole. The gauge has a bezel from the rear that secures the gauge...You can mount the gauge in any location were you can make a squre hole 
Just ask us for the gauge without a housing when ordering.
Cheers
Dan
Just ask us for the gauge without a housing when ordering.
Cheers
Dan
Thread Starter
8 Second Club
iTrader: (9)
Joined: Oct 2005
Posts: 1,085
Likes: 0
From: Ellicott City,MD
Originally Posted by DynotuneN2O
The guage needs a simple square hole. The gauge has a bezel from the rear that secures the gauge...You can mount the gauge in any location were you can make a squre hole
Just ask us for the gauge without a housing when ordering.
Cheers
Dan
Just ask us for the gauge without a housing when ordering.
Cheers
Dan
