whats up guys-

what purge kit would you recommend, (nitrous outlet halo). i dont have the kit yet, how do i know if its 4 an or 6 an? are there any other parts that i'll need to finish off the purge? i'd like it out the hood.

thanks guys

 

just get the NX gen-X kit

you will need most of the other stuff too
FPSS, heater, pressure sw, ect..

 

yeah i got all the other stuff i was just reffering to the purge- thanks though.

 

Your kit is likely a -4 AN mainline. Being a halo system, check with Dave, Chris or Ray to be sure.

Your good to go with any purge kit from any of the site vendors

 

Should be a -4an I would double check with Dave. Here is a great option for you at $59

http://www.dynotunenitrous.com/store...p?idproduct=24

Dean

 

Yes the Halo system comes with a -4 main feed line.

This purge is the one you need. It comes with 3 feet of alluminum tubbing and the solenoid has the same high quality we use in our systems.
http://www.nitrousoutlet.com/catalog...roduct_id=2184

If you want it to dual vent out of the hood by the windshield check this out.
http://www.nitrousoutlet.com/catalog...roduct_id=2757
Dave

 

great, thanks a lot guys!