Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

My 9.40 @ 145 pass

Thread Tools
 
Search this Thread
 
Old May 19, 2007 | 04:10 PM
  #1  
badboy4life's Avatar
Thread Starter
10 Second Club
 
Joined: Oct 2003
Posts: 557
Likes: 0
From: Lake Jackson TX
Default My 9.40 @ 145 pass

Took my car out to Sealy and made a few test hits. Track was not hooking for ****. I have been cutting 1.30 60fts on well prep tracks. I still was able to pull off a new best of 9.40 @ 145 with a 1.433 60ft. This is still on the 200 shot with the NOS progressive controller set at 60% out the hole and ramping to 100% in 1 sec. There's still a lot left in the car with this shot on the car.

1.433 - 60ft
3.92 - 330ft
6.039 - 1/8 mile
117 - 1/8 mph
9.40 - 1/4 et
145.16 - 1/4 mph




Thanks goes out to ICON Autosports and crew. Also would like to thank the guys over @ TransKing for the converter/tranny work.
Reply
Old May 19, 2007 | 04:36 PM
  #2  
BrianC98Z28's Avatar
10 Second Club
20 Year Member
iTrader: (11)
 
Joined: Aug 2005
Posts: 954
Likes: 0
From: Texarkana,TX
Default

what motor setup??
Reply
Old May 19, 2007 | 05:04 PM
  #3  
Questsi's Avatar
11 Second Club
iTrader: (1)
 
Joined: Jun 2006
Posts: 65
Likes: 0
From: SoCal
Default

sick
Reply
Old May 20, 2007 | 11:19 AM
  #4  
badboy4life's Avatar
Thread Starter
10 Second Club
 
Joined: Oct 2003
Posts: 557
Likes: 0
From: Lake Jackson TX
Default

Originally Posted by BrianC98Z28
what motor setup??

408ci 13.5:1 compression built by LME
ET Performance 245 heads
NX perimeter plate 200 shot
Reply




All times are GMT -5. The time now is 05:42 AM.