I Have a nx hitman setup with a fire and ice controller and a purge kit . The problem is its a hitman for a carb plate setup for a 3rd gen camaro and i have a 2002 z28. How would you proceed to set this up and what would i need? Should i pick up a shark nozzel and drill my slp lid? i have an ls6 intake. Wet dry ect...i am running a diablo tune and wonder what would br best to not lean out with a 100 shot setup.....

Thanks in advance for your help!!!

 

I would run a wet shot after (your maf) with a shark nozzle and sell the carb plate.

 

You will need the following.

Nozzle
Nozzle adapter
18inch -4 fuel hose (hose from shrader valve to fuel solenoid)
1/8 x -4 fitting
2x 1/8 X-3 fittings
2x 2 foot -3 hoses
and the correct jetting.
We have all this instock and it can ship the same day it is ordered. Let me know if I can help.
Thanks
Dave