Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

relay question

Old May 22, 2007 | 10:50 PM
  #1  
Lt1CamaroSS's Avatar
Thread Starter
11 Second Club
 
Joined: Sep 2006
Posts: 138
Likes: 0
From: woodbridge,NJ
Default relay question

i got a new relay for my nos kit..its a nos efi kit..and the diagram says difftrent colors on the relay wires...so my question is..on the relay..theres 5 numbers..30,85,86,87,and 87a..what does each one go to...if i didnt explain well enough ask and ill try better..but thanks for the help
Reply
Old May 23, 2007 | 06:48 AM
  #2  
NHRATA01's Avatar
TECH Fanatic
20 Year Member
Liked
Loved
iTrader: (10)
 
Joined: Jan 2002
Posts: 1,802
Likes: 36
From: Dutchess, New York
Default

30 and 87 are your high current side. 30 is the source power from the battery. 87 will be the energized closed output to the solenoids. 86 is your low current signal input from the activation switch, and 85 is your low current ground for that signal. Your safety items (window switch, WOT switch, FPSS) can go on either 85 or 86 to open/close the circuit.
Reply
Old May 23, 2007 | 07:43 AM
  #3  
Lt1CamaroSS's Avatar
Thread Starter
11 Second Club
 
Joined: Sep 2006
Posts: 138
Likes: 0
From: woodbridge,NJ
Default

ok..so i have 30 going to positive on the battery,87 goes to solenoids then the other solenoid wire goes to ground. 86 goes to accesory on the activaton switch.85 goes to gound
Reply
Old May 23, 2007 | 08:00 AM
  #4  
Danger731's Avatar
TECH Apprentice
iTrader: (3)
 
Joined: Oct 2005
Posts: 388
Likes: 0
From: Indy
Default

there is a HUGE sticky section on this topic
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:14 AM.