Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Wet kit jet size question

Thread Tools
 
Search this Thread
 
Old 04-29-2003, 08:28 AM
  #1  
11 Second Club
Thread Starter
iTrader: (7)
 
redsscamaroboy's Avatar
 
Join Date: Sep 2002
Location: Lansing,MI
Posts: 1,168
Received 2 Likes on 2 Posts

Default Wet kit jet size question

Question on wet kit jet sizes. I have a chart from a fellow board member ,but wonder what you fellas might think. Nitrous jet is a .065 and the fuel jet is 0.40 supposed to be 150 horse to the flywheel. Sound about right or no. And is that too much big on fuel jet size? mph is only 115 and looking for more mph in quarter mile. All thoughts welcomed!
Old 04-29-2003, 09:37 AM
  #2  
TECH Fanatic
iTrader: (12)
 
xaon's Avatar
 
Join Date: Jan 2002
Location: Tomball, TX
Posts: 1,737
Likes: 0
Received 1 Like on 1 Post
Default Re: Wet kit jet size question

my NX wet kit lists a 62/35 combo as 150hp to the wheels. What you posted sounds more like a 175 or 200 shot to the rear wheels.
Old 04-30-2003, 09:36 AM
  #3  
11 Second Club
Thread Starter
iTrader: (7)
 
redsscamaroboy's Avatar
 
Join Date: Sep 2002
Location: Lansing,MI
Posts: 1,168
Received 2 Likes on 2 Posts

Default Re: Wet kit jet size question

Well i hope that is not the case . That is not cool on stock fuel system. But i did run that all last year. I added a GMS and since then i have not gotten the numbers i want from the track time slips yet. Talking in the drag racing section i was advised to remove that and see on the dyno what a/f ratios look like. That sounds like good advise to me. Dyno numbers should help shed light on this don't ya think. Thanks for your thoughts.




All times are GMT -5. The time now is 08:50 AM.