Solenoid question
Thread Starter
Staging Lane
Joined: Jan 2007
Posts: 62
Likes: 0
Solenoid question This may be supid but i thought ill'd as just incase.
I Installed my fuel and nitrous noids today
On the fuel noid i had to turn it around so the inlet and outlet ports were on the right side i needed them to be. but i noticed if i undo the top bolt on the noid i could turn the top half (were the coil is) around it still looks good and so i could see the nice wrighting on the top half of the noid :p. Is this fine to do... i hope that made since but i gota ask
I Installed my fuel and nitrous noids today
On the fuel noid i had to turn it around so the inlet and outlet ports were on the right side i needed them to be. but i noticed if i undo the top bolt on the noid i could turn the top half (were the coil is) around it still looks good and so i could see the nice wrighting on the top half of the noid :p. Is this fine to do... i hope that made since but i gota ask 
11 Second Club
iTrader: (32)
Joined: Jan 2006
Posts: 3,701
Likes: 2
From: Southaven, MS (near Memphis, TN)
Originally Posted by lak8
This may be supid but i thought ill'd as just incase.
I Installed my fuel and nitrous noids today On the fuel noid i had to turn it around so the inlet and outlet ports were on the right side i needed them to be. but i noticed if i undo the top bolt on the noid i could turn the top half (were the coil is) around it still looks good and so i could see the nice wrighting on the top half of the noid :p. Is this fine to do... i hope that made since but i gota ask
I Installed my fuel and nitrous noids today
On the fuel noid i had to turn it around so the inlet and outlet ports were on the right side i needed them to be. but i noticed if i undo the top bolt on the noid i could turn the top half (were the coil is) around it still looks good and so i could see the nice wrighting on the top half of the noid :p. Is this fine to do... i hope that made since but i gota askYes it will be ok.